Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Start by setting up the gripper you intend to use. Choose Gripper and Mounting in the meny on the left side. You can move between the different steps with this meny, or use Next or Previous buttons in the bottom right corner.

Info

We recommended to mount the gripper onto the robot so that the X2 tool connector faces down the conveyor.

image-20240828-133436.png

You can choose the nativelly integrated grippers, or you can chosse a custom gripper.

Integrated Grippers

If you chosse a nativelly integrated gripper we have already set the dimensions for the gripper.

image-20240829-103814.pngImage Added

To set the TCP when you choose a integrated gripper, you choose the PallyTCP in the tool meny.

image-20240829-104020.pngImage Added

Custom grippers

If you want to use another gripper, that is not on the list of integrated grippers, you choose custom and then you choose the type of custom gripper.

Custom gripper - Here you can set the dimensions and tcp values of your gripper yourself

Custom vacuum gripper - Here you can set the dimensions and tcp values for the gripper yourself.

Import from gripper json - You can create your own completelly customized gripper by utilizing the gripper json feature. Read more about it in this article - Gripper JSON file format

image-20240829-104456.pngImage Added