...
A: You create pattern in the web browser at this address: https://palletizer.rocketfarm.no/ MyRobot.Cloud
Q: How do I get the patterns into the robot?
A: The exported file must be copied onto a USB together with urmagic_upload_patters. All the pattern files must be in the root folder.
...
A: There are 2 entry points for the beforeZone callback. One is after restarting the stopped program and clicking on "Continue existing pallet". The other is when the pallet completion state changes so that the robot starts with a new zone - which is by default also a new layer. One zone may contain several layers, especially when the product height is smaller than 20% of the lifting column maxdefault also a new layer. One zone may contain several layers, especially when the product height is smaller than 20% of the lifting column max.
Q: What are the benefits of having a lifting column?
A: A lifting column can be essential for palletizing projects.
A UR10 will only be able to palletize pallets up to approximately 1,5 meters without a lifting column.
By using a lifting column with a stroke of 900mm a UR10 can easily palletize patterns up to 2,3 meters.
Even if a palletizing installation originally is set up for pallets lower than 1,5 meters, by including a lifting column the palletizing solution becomes futureproof, and makes it easy to use with new products and pallets in the future with no need for additional hardware.
A lifting column helps to reduce wear of the robot. By placing the base at ideal height we enable the robot to move as smoothly as possible by utilizing all joints and creating smooth movements in all joints.For UR20 the same principles apply, but of course the range for that robot is bigger, so the pallets must be above approximately 2,2 meters before a UR20 needs a lifting column to be able to palletize all positions.
But the wear part is valid for UR20 as well as for the UR10.
Q: What is the variable for the lifting column?
...
We have had cases before where collision with the base has been a challenge, especially in the beginning of the palletizing process. To avoid this you can use the "inverted approach" setting in the Pally Pallet Builder, either on the first couple of layers or for the entire pallet. See photo below.
...
MyRobot.Cloud
Interested in our
...
MyRobot.Cloud?
We offer the ability to generate a pallet pattern at the website
https://palletizer.rocketfarm.no/home . MyRobot.Cloud
On this site, you can make a pattern, then download a JSON palletizing file. We then use this JSON file as input to the Pally URCap (application for a UR robot). Once the JSON is loaded to the robot, and the robot is installed and calibrated, you choose the selected JSON, and click "Play". Then the robot starts to palletize.
...