Skip to end of banner
Go to start of banner

Exporting the calibration data

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Current »

This article is written for Pally Module for Doosan cobot

When you have completed the steps you can export the calibration. This is used as foundation to creating Pally programs together with the pattern in MyRobot.Cloud. You can do this as the last step in Calibration or do it from Advanced

image-20240902-124122.png

image-20240902-134355.png

Validate and Export Calibration

As

  • No labels