How to create a license request and upload a valid license to the robot
Steps:
In the Pally Installation node, navigate to the tab labelled ‘License’
Insert a USB-stick into the teach pendant.
Press “Copy request to USB” (Figure 1).
Send the file generated on the USB-stick to license@rocketfarm.no - The file should have the name: no.rocketfarm.urcap.”SERIAL NO”.license_request
Put the license file Rocketfarm sends back to you on a USB-stick and plug it into the teach pendant.
Press “Load license from USB“ (Figure 1).
...
Valid Pally license is uploaded to the robot
Replacing a license
When replacing a license it’s recommended to remove all old license files first.
After removing the old license file(s), the new one can be uploaded as described above.
Steps to remove old license file(s):
Attach a keyboard to the teach pendant.
Press “Ctrl + Alt + F1”.
Enter “login, user: root, password: easybot”.
Enter "cd /home/ur/.no.rocketfarm.urcap.palletmanager".
Enter “ls -a”.
This prints a list of all files in the folder.
The license file(s) name(s) all end with “.license”.Enter “rm [name of license file]”.
A tip here is to start type in the license name and press the TAB-key for auto completion.
Do this for all license files listed in step 5.Press “Ctrl + Alt + F7”
Having issues loading the license from USB?
If you are experiencing that the loading fails, we recommend to try the following:
Follow the steps under “Replacing a license” to make absolutely sure that there are no old licenses installed on the robot.
Use an empty USB-stick and place the license file, and the license file only, in the root folder.