Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Software Requirements

CB-Series: Palletizer URCap requires Polyscope version 3.11 or higher.

e-Series: Palletizer URCap requires Polyscope version 5.5.1 or higher.

Hardware Requirements

Due to size limitations, the palletizer URCap requires a UR10 robot.

CB-series version 3.0 is not supported yet. Please let us know if you have i project with CB3.0 at the Rocketarm support portal

  • No labels