Skip to end of banner
Go to start of banner

Create instant 72-hour license

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 10 Current »

Temporary 72-hour license is available from Pally URcap 2.12.0.

Download latest Pally URcap version

Introduction to the instant 72-hour license

The 72-hour license is made available for the cases where you are in pressing need for a valid license. The 72-hour license can only be created once for each robot.

Typically use cases for creating the 72-hour license:

  • Installing a project outside the working hours of Rocketfarm (08:00 - 16:00 CET)

  • When the license can’t be delivered in time due to email or internet related issues

How to create the 72-hour license

NOTE: A USB-stick need to be plugged into the teach pendant before creating the 72-hour license

See video below on how to create the 72-hour license for Pally

72 hour license - eSeries.mp4

  1. Plug a USB stick into the teach pendant

2. Navigate as follows to create the 72-hour license for Pally

→ Installation node

URcaps → Pally → License

Press “Copy request to USB” and select the Yes button

A valid 72-hour license for Pally is now created.

Note: The license can only be created once and is robot specific.

  • No labels