/
Installation of Pally for Doosan
Installation of Pally for Doosan
Installation from USB
This article is written for Pally for Doosan cobot
●Download the provided Pally .dm file from Rocketfarm to a USB flash drive
●Insert the USB flash drive in the robot
●On the Home screen - press Install Module
●Select your USB flash drive and choose the provided Pally .dm file
You will then see two new icons; Pally and POP (Pally Operator Panel)
, multiple selections available,
Related content
Pally for Doosan - License
Pally for Doosan - License
More like this
Pally for Doosan
Pally for Doosan
More like this
Pally for Doosan - Programs and patterns
Pally for Doosan - Programs and patterns
More like this
Pally for Doosan - Gripper
Pally for Doosan - Gripper
More like this
Pally for Doosan - Calibration
Pally for Doosan - Calibration
More like this
Calibration - Conveyor
Calibration - Conveyor
Read with this