/
Input/Output - Pallet
Input/Output - Pallet
- Csaba Mucsi
- Lars Martin Gjeraker (Unlicensed)
Owned by Csaba Mucsi
Confirm pallet signal: This input signal tells Pally to start palletizing either on the Left Pallet or the Right Pallet. Usually a physical push button, or signal from external PLC.
The signal must go from LOW to HIGH and should remain HIGH for at least 300 msec to confirm a new empty pallet.
If both signals are high at the same time when a product is selected, Pally will start palletizing on the right pallet.
No pallet signal: Notification output signal to the operator. Usually connected to a LED backlight inside the pallet confirmation push button, or signal to a PLC.
Confirm pallet signal not activated: the No pallet signal is blinking at 1 Hz signal (HIGH-LOW)
Confirm pallet signal activated: the No pallet signal output is constantly LOW.
, multiple selections available,
Related content
Product Selection Strategy
Product Selection Strategy
Read with this
Empty pallet confirmation and current pallet status
Empty pallet confirmation and current pallet status
More like this
The Pally User Manual (PDF)
The Pally User Manual (PDF)
Read with this
Pallet Runtime (previously known as Pally Operator Panel or POP)
Pallet Runtime (previously known as Pally Operator Panel or POP)
More like this
Other/Special variables
Other/Special variables
Read with this
PalletNr
PalletNr
More like this