/
Calibration box - Program node

Calibration box - Program node

Owned by Csaba Mucsi
Last updated: Sept 13, 2023 by Csaba Mucsi
1 min read

The calibration box is used to calibrate the pickup position and the pallets. The box could be any box but most usually it’s the box to be palletized.

 

Place the box on the pickup position and measure it’s Length, Width and Height

 

Read more about Calibration box

Calibration box tab in the Pally URcap

 

Related content

Primary
Primary
Pally Knowledge Base
Read with this
Calibration box
Calibration box
Pally Knowledge Base
More like this
Setting up Pally
Setting up Pally
Pally Knowledge Base
Read with this
Pally Calibrations
Pally Calibrations
Pally Knowledge Base
More like this
Pickup calibration
Pickup calibration
Pally Knowledge Base
Read with this
Calibration Test Wizard
Calibration Test Wizard
Pally Knowledge Base
More like this